pH minus 7.5 kg
Perfect pool water requires a pH value between 7.0 - 7.4. A pH that is too high makes the water cloudy or milky with poor chlorine effectiveness.
Within the pH range 7.0 - 7.4, the water is slightly alkaline, and here you get a good beneficial effect from the addition of chlorine.
Advertising [Product3rdColumn]
Product description:
pH minus is an easily soluble granulate for lowering the pH value in swimming pool water.
It is easy to handle and has high chemical purity.
The correct pH value is the basis for effective and skin-friendly water care.The ideal is: 7.0 - 7.4.
If the pH value is too low, the water becomes acidic and aggressive, corrodes metal and
is highly irritating to eyes and mucous membranes. If the pH value is too high, the water becomes soapy
and the disinfecting effect of chlorine is reduced. Chlorine consumption doubles at pH=8.5 compared to pH=7.4.
Instructions for use:
· Measure the current pH value.
· If the pH value is above 7.5: Mix the product in a bucket with water.
Mix until the powder is completely dissolved and then add the solution to
the skimmer or in front of the inlets to the pool.
· The water must be circulating when pH minus is added
· As a guide, use 5 g/m³ to lower the pH by 0.1.
· The dosage varies depending on the water quality in your area.
Hard water increases the dosage and soft water reduces it.
· Never use more than 50 g per m³ of water per dose (pH above 7.8).
· Check the pH value daily. 7.0 - 7.4 is the ideal.
· Recheck the pH value after 15-25 minutes.
Repeat treatment if necessary
| Mængde af PH Minus til at sænke PH værdien. | |
| Nuværende PH værdi | |
| Mængde vand i kubik (Eks.10 m3 = 10 ) | |
| Ønsket PH værdi | |
| Mængde PH Minus i gram | |
