Disinfection Forte

Instructions for use:

• Set the pH value to 7.2.
• Before pool start-up/prevention: Clean the pool thoroughly.Prevent by spraying a dilution of 2 dl per 10 l of water on the pool floor and walls before filling the pool with water.
• Pool start-up: Initial addition; after filling with fresh water, add 2 dl per 10 m³ directly to the water with the pump running.
• Weekly maintenance dosing:
• Indoor pools: ½ dl per 10 m³ of water
• Outdoor pools: 1 dl per 10 m³ of water.
• In cases of heavy algae growth, e.g. after thunder rain: 2 dl per 10 m³ of water is added directly to the water precisely in the areas where the problem exists (e.g. areas with limited circulation).
• Winter preparation: 1.5 dl per 10 m³  of water.
• Chlorine-disinfect with a fast-dissolving chlorine product or active oxygen. Shock-chlorinate during winter preparation and heavy algae growth.
• Add Desinfektion forte in front of the inlet nozzles with the pump running for optimal distribution.
• Can be used in a dosing pump for public outdoor pools.
• Use flocculant. Repeat the process if the water is cloudy.

  Important: Adjust pH and chlorine content before bathing.

Must not be used in aquariums