Baqua CHECK 3 L.
Used as an activator for Baqua Plus and Baquacil Shock in chlorine-free pools
to prevent microbiological growth and cloudiness in the pool.
Advertising [Product3rdColumn]
You might also like
Instructions for use:
When refilling the pool:
1. Measure the pH value, which should be between 7.0 -7.6. Lower with pH-minus or raise with pH-plus. Check the alkalinity, which should be between 80 -120 mg/l. Adjust if necessary.
2. Add 2 l Baquacil Shock per 10 m3 of water
2. Add 2 l Baquacil Shock per 10 m3 of water
3. Add 1 dl BAQUACIL CHECK per 10 m3 of water directly into the pool in front of the inlet nozzles with the filter system running, but without bathers in the pool.
4. 24 hours later, add Baquacil PHMB according to the instructions on the PHMB label. Swimming can take place ½ hour later.
Weekly pool maintenance:
1. Measure the pH value and adjust as mentioned above. Add the oxidizing agent Baquacil Shock according to the instructions on the product label.
2. Check and add, if needed, the disinfectant Baquacil PHMB according to the instructions on the product label.
3. Add 1 dl BAQUACIL CHECK per 10 m3 of water, directly into the pool with the filter pump running; swimming can take place ½ hour later.
In case of very cloudy water:
4. Add double dose = 2 dl. BAQUACIL CHECK per 10 m3 of water as mentioned in the instructions above.
500730
Kunder som köpte den här produkten köpte också:
